 |
|
|
|
|
 |
Heating Jackets for Geometric Shapes: HTS/Amptek Heating Jackets may be constructed to fit simple to complex shapes. Custom Chamber Heating Jacket: The jacket at the left was designed for bake out of a custom vacuum chamber. Only part of the complete assembly is shown which included multiple heat zones and 4ea K type thermocouples per zone. Once a vacuum is applied to a chamber, it is necessary to heat the chamber to excite the remaining particles to encourage them to exit. |
 |
|
|
| Conical shaped Jacket example (shown inverted) to fit the bottom of a feed vessel... | Duct shaped Jacket to heat a rectangular, inlind conveyer oven... | Spherical Jacket to heat an aluminum chamber... With special cut-outs. |